Download User Manual

*) Die angezeigte Information ist abhängig vom ve
The information displayed is dependent on the
1A
SYMBOL
—> If a question mark “?”Bxappears
in the second /line of the display, there is
27500
no input signal present.
Check the configuration
/ of the antenna system
and head-end station as well as the preceding settings of the module in
M
question.
Bx 1A
FREQ
11836 MHz
+0.2
/
/
t Using the
buttons, select Mthe digit of the frequency displayed to be
set.
Bx 1A
01/07 + TV
t 6TFUIF
buttons to set the input frequency. /
Das Erste
Ein/On
Programmauswahl / Channel selection
t Press the
buttons to adjust the input frequency
displayed so that the
frequency offset amounts to less Mthan 1 MHz.
SETUP
BE160
—> A status LED indicates the quality of the received input signal:
V7
AUDIO
Bx 1A
01 / 02 “deu”
/
LED indicator
Signal quality
Green
Good
M
Bx 1A
QUAD Poor
Orange
Das
Erste
V no
1 signal
Red
Bx 1A
AUDIO
Level
M0 dB
/
M
t 1SFTTUIF button.
Bx 1A
LNB
—> The “Setting the station
filter”
10600
MHzmenu is activated.
>
Bx 1A
/
mpeg
Setting the station filter
/
AUDIO
DUAL norm
M
M
/
/
Das Menü wird nur bei Auswahlmögl
mehrerer Begleittöne angezeigt.
This menu is only displayed if severa
streams are selectable.
Bx 1A
TWIN-SAT
Böx 4
TWIN-SAT
Bx 1B
QUAD
C5-12,S3-24
C07
C5-12,S3-24
C07
WDR Köln
V1
A
-26 … 6 dB
Bx 1A
MENU
1/6
Information *)
/
/
M
norm / swap
mpeg / VPS
*) Die angezeigte Information ist abhängig vom ve
The information displayed is dependent on the
In this menu, select the channel from the data stream that is to be made availBx 1A
VIDEO
//
Bx 1A
SYMBOL
able through this channel strip.
WSS off
TXT on
on / off
27500 no transponder” //appears, no input signal
If the error message “SERVICE
is present. In this case, you shouldMcheck the previous settings as well as the
M
configuration of the SAT antenna system.
Bx 1A
TESTLINES
If the “scanning ...” message
appears
on the display,
the table of received
Bx 1A
FREQ
/
off
channels is being read. Please
wait
until
this
process
is
finished.
on / off
/
11836 MHz
+0.2
/
As soon as the station filter has found all of the TV or radio channels, the correM
M of the head-end station.
sponding data appears in the display
Bx 1A
01/07 + TV
Das Erste
Bx 1A
SUBTITLE
off
M
/
Programmauswahl
/SUBTITLE
Channel selection
Bx 1A
txt
150
west
B
d
/
Das Menü
M wird nur/bei Auswahlmögl
AUDIO
off / txt / dvb / black mehrerer Begleittöne
/ angezeigt.
This menu is only
displayed
01 / 02 “deu”
/
west
/ east if severa
streams are selectable.
Bx 1A
M
- 15
M
HDC 480 CI AV