Download Display Control

NovaStar Tech Co.,Ltd
Click this button to save the calibration coefficients of the selected display area to the specified
database. If the database for saving the coefficients is a cabinet database, a dialog will appear for
users to input the cabinet ID.
5.8.2.3 Set coefficients for a new scan board

Step 1
Specify the LED display area that the new receiver card (scan board) works for. Shown in Fig.5-86
www.telematics.ca
is the page for specifying the area.
Fig. 5-86 the page for specifying the working area of the new receiver card

Step 2
Select the calibration coefficient source. The coefficients could be from a database (the Database
option) or generated according to those of the surrounding receiver cards (the Refer to
Surrounding Scan Board option). Fig.5-87 and Fig.5-88 show the pages for two option
109
Phone: NovaStar (Xi’an) 86-29-84507048NovaStar (Shenzhen) 86-755-33592492
Website: www.novastar-led.com