Download User manual

VFD - NXL Carel
6.1.6.
Installation of cables to CAREL VFD-NXL
Note: In case you want to connect an external brake resistor (MF3 and bigger sizes), see separate Brake Resistor Manual.
Control cable
Earth terminal
Motor cable
Mains cable
Figure 6.f
Carel NXL, MF2
Figure 6.g - Cable installation in Carel NXL, MF2 (500V, 3-phase)
Control cable
Brake resistor
terminals
Earth terminal
BRBR+
Motor cable
Mains cable
Figure 6.i. Cable installation for MF3
Figure 6.1. h - Carel NXL, MF3
NOTE!: MF2-MF3: It is advisable to connect first the cables to the terminals and earthing plate, and then attach the terminals and earthing plate to the
unit.
Cod. +030220721 – Rel. 1.0 – 04/07/06
21