Download 5 - Schneider Electric

DANGER
HAZARDOUS VOLTAGE
• Read and understand this manual in its entirety before installing or operating
ALTISTART 46 (ATS46) controllers. Installation, adjustment, repair, and
maintenance of these controllers must be performed by qualified personnel.
• Disconnect all power before servicing controller.
• DO NOT touch unshielded components or terminal strip screw connections
with voltage present.
• Install all covers before applying power or starting and stopping the
controller.
• User is responsible for conforming to all applicable code requirements with
respect to grounding all equipment. See Figures 1-5 on pages 5-7 for
grounding points.
• Many parts in this controller, including printed wiring boards, operate at line
voltage. DO NOT TOUCH. Use only electrically-insulated tools while making
adjustments.
Before installing controller:
• Disconnect all power.
• Place a “DO NOT TURN ON” label on the controller disconnect.
• Lock disconnect in open position.
Electrical shock will result in death or serious injury.
© 1998 Square D Company. All rights reserved. This document may not be copied in whole or in
part, or transferred to any other media, without the written permission of Square D.
ALTISTART and TCS are registered trademarks of Telemecanique S.A. or its successor-in-interest,
Schneider Electric S.A.
InTele Braking is a registered trademark of Square D Company.