Download "user manual"

Transcript
HP Z3100ps
20
101. Does your printer allow switching from dye to pigmented ink? (note: such a normal change is totally impossible on
Epson 7500, 7600, 9500, 9600, 10000, 10600). How much effort is required to switch from dye to pigmented inks? Is the
switching process completely clean or do you need to have a tarp or protect your carpet or nearby walls otherwise? (older model Encad printers are legendary for ink splatter everywhere; you can go into any print shop, and even when the
printer is no longer there, you can always tell where the printer was parked by the ink spots everywhere in the vicinity).
No longer do any new HP printers allow switching from dye to pigmented ink, or from pigmented ink to dye ink.
COLOR MANAGEMENT FEATURES
102. What color management software is
included?
HP and GretagMacbeth have worked together
to develop the HP Advanced Profiling Solution,
powered by GretagMacbeth™ technology, which
takes advantage of the spectrophotometer built
into the printer to provide a calibrated ICC color
workflow.
But if you want to do more sophisticated
professional color management, you need to pay
extra for a higher level of hardware and software.
103. What color management tools are
included within the printer?
HP Designjet Z3100 printers use a built-in
spectrophotometer for color calibration and
profiling.
But this can’t work well on plain paper and is not
intended for working on transparent material such
as for backlit.
You can calibrate the color settings of your printer
The manual makes it very easy to understand when you will need to do a profile:
• For every new printhead
• For any new kind of paper
• When a lot of time has passed since the last profile (printheads wear out and thus lay down ink differently)
• If temperature and/or humidity are different than when the original profile was made.
104. How easy is it to use outside ICC profiles for after-market media?
Some printer companies work hard to encourage you to use their own canned profiles. These printer manufacturers prefer that you
not learn how to profile after-market media, because if you learn how to do your own ICC color profiles, you can switch to non-brand
after-market media.
But HP is not ruthless in this respect, for which they deserve recognition. The Z3100 manual even mentions you can use after-market
media. However, since FLAAR is independent, we can make sort of a footnote, namely that canned profiles tend not to be as good as
personal profiles that you make yourself. Canned profiles have no way to know the temperature and humidity of your printshop, how
worn or how fresh your printheads are.