1
Download REVISION
Transcript
Operation ProLine 2200 User’s Manual REV N Aluminum - 30 Amps – Air Plasma / Nitrogen Shield Copper Electrode Shield Cap 277145 Outer Cap 277154 Imperial Nozzle 277120 Electrode 277130 Retaining Cap 277153 Swirl Ring 277140 Torch Head 279150 Material Thickness Preflow Air Plasma Air Shield Nitrogen Postflow Air Arc Voltage Travel Speed Cutting Height Pierce Height Pierce Time Kerf Width (in) (psi) (psi) (psi) (psi) (volts) (ipm) (in) (in) (msec) (in) 30 92 20 2 135 .100 100 .065 .150 200 .070 .040 .050 150 .063 Metric 120 .030 90 Material Thickness Preflow Air Plasma Air Shield Nitrogen Postflow Air Arc Voltage Travel Speed Cutting Height Pierce Height Pierce Time Kerf Width (mm) (psi) (psi) (psi) (psi) (volts) (mm/m) (mm) (mm) (msec) (mm) 2.5 100 1.7 3.4 200 1.8 1 1.5 30 92 20 2 135 3885 2520 0.8 * Use an arc transfer height (ignition height) of .100” (2.5 mm) 1. Revised on 01/18/2011 This information is subject to the controls of the Export Administration Regulations [EAR]. This information shall not be provided to non-U.S. persons or transferred by any means to any location outside the United States contrary to the requirements of the EAR. 4-25
