Download DRAFT - PENDING SIGNATURES

Transcript
14 HART®
Connections
Examine the power supply connections for the transmitter
before connecting the HART® transmitter to the DPI 620
calibrator.
14.1 Power supply from the calibrator
In this example, the DPI 620 calibrator supplies the loop power
and a 250Ω HART® resistor.
Measure current on channel 2
(CH2) with 24V loop power
Range: ±55 mA
HART® Function is set
250Ω resistor is set
1. Set the functions for channel 2 and HART®:
Set Current (24V); Measure
User Manual Section 2.10.4
1
e
Home display
c
b
Set HART
User Manual Section 2.10.4
d
a
Please note that the current
measured on Channel 2 for a
HART device should normally be
between 4 and 20 mA.
[EN] English - Communications Supplement K0446
HART® Connections 16