Download DRAFT - PENDING SIGNATURES

2.Set the HART® Resistor.
Turn on the internal HART® resistor. This can be selected
by pressing
icon.
3. Complete the electrical connections and continue with the
HART® menu operation.
14.3 Communicator attached to a network
In this example, the calibrator connects directly to a network.
There must be a 250Ω resistor in series with the loop power
supply and the HART® device.
No functions
on channel 2 (CH2)
HART® Function is set
250Ω resistor is set to
Off
1. Set the function for HART®:
1
d
b
Home display
®
Set HART
User Manual Section 2.10.4
c
a
TAP
[EN] English - Communications Supplement K0446
HART® Connections 18