Download - Olympus

Alarm message list/Troubleshooting
[Cannot play this file]
File which cannot be
played.
Incompatible format.
Please confirm the file
that can be played on
this recorder.
[Please Select The
File]
Unselected File
File is not selected.
Please select a file then
carry out the operation.
[Same folder. Can't
be moved(copied).]
File cannot be moved
(copied).
Attempting to move (copy) Please select another
into the same folder.
folder.
[Some files. Can't be
moved(copied).]
File cannot be moved
(copied).
File in the destination
with the same name, or
file with DRM.
Please select another file.
[This file can't be
divided.]
File which cannot be
split.
Attempting to split a file
besides the PCM files
recorded in this recorder.
Please select another file.
Troubleshooting
Symptom
Nothing appears on
the display
Won’t start
Action
The batteries are not loaded properly.
Verify that the batteries’ polarities =
and - are correct (☞ P.14).
Battery power is getting low.
Replace with new batteries (☞ P.14).
The power is off.
Turn the power on (☞ P.18).
Battery power is getting low.
Replace with new batteries (☞ P.14).
The power is off.
Turn the power on (☞ P.18).
The recorder is in HOLD mode.
Release the recorder from HOLD
(☞ P.19).
Low remaining memory.
Erase unnecessary files (☞ P.42).
Unable to record
The maximum number of files has
been reached.
Change to the another folder
(☞ P.24 to P.27).
No playback tone
heard
The earphone is connected.
Unplug the earphones to use the
internal speaker.
The volume level is set to [00].
Adjust the volume level (☞ P.33).
The recording level has not been
adjusted.
Adjust the recording level and then try
recording once more (☞ P.47).
The microphone sensitivity is too low.
Set the microphone sensitivity to
[High] or [Middle] mode and try again
(☞ P.47).
This could potentially be because
the output level for the connected
external devices are too low.
Adjust the output level for the
connected devices.
Recording level too
low
8
Alarm message list/Troubleshooting
Probable cause
121