Download "user manual"
Transcript
Fog lamp Switch (If installed) This is for fog lamp. • Turn Signal Switch Turn signal lights are used when turning left/right or changing lane. Turn ignition switch to “ON”, and slide the turn signal switch to left or right. Then, the turn signal lights will flash. To release, simply return the turn signal light button to the original position. Right-side turn signal light flashing means you intend to make a right turn. Left-side turn signal light flashing means you intend to make a left turn. • Power supply comp The accessory socket is inside the inner box .You can use the accessory socket to power a trouble light, PDA, spotlight, radio, or cell phone, etc. y y y CAUTION: Do not plug in any head-generating accessory such as an automobile cigarette lighter because it can damage the socket. Do not use the socket in raining day. Do not splash water or other liquid on socket when using the socket. To use accessory socket, turn the ignition switch ON to start the engine. Then turn the headlights OFF , and open the accessory socket cap. The accessory socket’s rated capacity is DC 12V, Max 60Watts (5A) and below long-term usage 4 hours. ENGINE CONTROL SWITCH y This switch is located in the luggage box, under the seat. y To set on the ENG. control switch, switch it to 〝ON〞or〝 〞. y Switch to〝OFF〞或〝 〞,before start the engine. Be sure the seat locked preperly after set on the switch. y engine control switch 7. Use of each component 11