Download UP750 | Dual loop control

<Toc>
4-2
<4. Operations>
● PV2/OUT Display (Loop2)
The PV input value of Loop2 appears on the PV display.
On the Setpoint display (LCD), the controller displays the PV input value of Loop2 (PV2),
the program pattern number (PTNO), the segment number (SEGNO) for which operation is
in progress, and the number of segments included in the selected program pattern, and the
control output value (OUT).
● Deviation Trend Display (Loop1)
The PV input value of Loop1 appears on the PV display.
On the Setpoint display (LCD), the controller displays the deviation trend.
● Deviation Trend Display (Loop2)
The PV input value of Loop2 appears on the PV display.
On the Setpoint display (LCD), the controller displays the deviation trend.
● Pattern Display
On the Setpoint display (LCD), the controller displays the selected program pattern.
● Event Display
On the Setpoint display (LCD), the controller displays the event number for which an event
has occurred.
IM 05E01B02-51E
3rd Edition: May 31, 2006-00