Download H.264 NETWORK Embeded DVR

2.2.2.5.3
MOTION DETECT
Move the cursor to【MOTION DETECT】（Icon highlighted when selected），press【Enter】
to enter into setting interface.
STATUS：Each channel has corresponding channel switch, press 【Enter】to turn on or turn
off the motion detection for each channel..
SNESITIVITY：each channel has corresponding sensitivity setting,including four standards
high,higher,medium and low, press【Enter】key to switch
MD AREA： each channel has corresponding regional motion detecting setting,move the cursor
to corresponding【setting】，press【Enter】to enter regional setting interface, red area means it
have activated motion detection, transparent block means it have not activated motion detection.
21