Download Chapter 7. Configuring BlueCAD Express
Transcript
Delete, Update and Modify a Block A block that has been positioned in the drawing can be deleted just like any other entity, by means of the Delete command (Menu: Edit|Delete). To delete a block from a library click the right mouse button on the block's icon present in the library, then select the Delete command in the contextual menu. If you delete a block from the Memory library using this procedure, then all the corresponding blocks in the drawing will be substituted with a label having the name of the block and a cross in the origin point of the block. If a block with the same name is then created, all the labels will be substituted with the new block, keeping the original rotation angles, scales and position points. This allows you to fast and efficiently substitute and update blocks in a drawing. If you want to modify a block or create a new block starting from an existing one: 1 2 3 Position the block you want to modify in the drawing by taking it from the library it’s stored in. Select the Explode command (Menu: Modify|Explode) and click on the positioned block. If you want to modify the block, cancel it in the Memory library in order to re-compose it modifying its single elements. If you want to create a block with another name instead, using still the components of the existing block you don’t need to cancel the block in the Memory-library; just modify the elements and save as the new name. If you want to modify one single positioning of a block you have to decompose the block into its component entities: The Explode command (Menu: Modify|Explode) allows a selected block to be decomposed into its component 53