Download Chapter 7. Configuring BlueCAD Express

Transcript
Delete, Update and Modify a Block
A block that has been positioned in the drawing can be
deleted just like any other entity, by means of the Delete
command (Menu: Edit|Delete).
To delete a block from a library click the right mouse
button on the block's icon present in the library, then select
the Delete command in the contextual menu. If you delete
a block from the Memory library using this procedure,
then all the corresponding blocks in the drawing will be
substituted with a label having the name of the block and a
cross in the origin point of the block. If a block with the
same name is then created, all the labels will be
substituted with the new block, keeping the original
rotation angles, scales and position points. This allows you
to fast and efficiently substitute and update blocks in a
drawing.
If you want to modify a block or create a new block
starting from an existing one:
1
2
3
Position the block you want to modify in the drawing by taking it
from the library it’s stored in.
Select the Explode command
(Menu: Modify|Explode) and
click on the positioned block.
If you want to modify the block, cancel it in the Memory library
in order to re-compose it modifying its single elements. If you
want to create a block with another name instead, using still the
components of the existing block you don’t need to cancel the
block in the Memory-library; just modify the elements and save
as the new name.
If you want to modify one single positioning of a block
you have to decompose the block into its component
entities:
The Explode command (Menu: Modify|Explode) allows
a selected block to be decomposed into its component
53