Download Wireless Serial-Ethernet Server STW

Appendix C. Upgrading System Software
Updated version of firmware can be downloaded from www.aaxeon.com.
C.1. System Upgrading Procedures
Follow the upgrading procedures below for the latest firmware.

Make sure the PC and STW-602C on the same network. Use command “ping” or
“SerialManager” utility program to verify their availability

Edit “dll.bat ” to fit the system requirements, Be sure to save all modifications

Run dll.bat ,or type command and parameters by linux_dl_v2.exe, the following screen shall
appear:
linux_dl_v2.exe zImage.bin 192.168.1.160 (device’s IP is 192.168.1.160)
 Tips : “linux_dl_v2.exe” is the upgraded executing file(can find on setup cd) and zImage.bin is the
name of the firmware file; xxx.xxx.xxx.xxx is the IP address of STW-602C.
Fig 81. Start firmware upgrade procedure for STW-602C
STW-602C shall automatically perform the download at first phase, and restart after downloaded
process at secondary phase
Fig 82. Connected & downloading process for STW-602C’s Upgrade
C.2. Critical Issues in Upgrading Process
If the upgrading is successful, STW-602C shall re-program the flash memory, and the buzzer will beep before
restarting. It takes around 5 seconds to complete the re-programming. If an error occurs during the
64