Download Analyzer User Manual

5.2.
Editing Fields
Several different possibilities for editing the contents of each field are available. Here is a list:
!
Click to select or do: The Scope/Recorder switch and the Acquisition mode are of this type.
Select the desired state. When this is used with a text of the form A/B, A is chosen when the
Black dot is present and B is chosen when it is not.
!
Click to change or do: The Input A/ Input B, and the Calibrate action are of this type.
!
Choose from a list: Coupling, and Bandwidth Limit are of this type. Do not attempt to use the
keyboard on this kind of field.
!
Change value up/down: Input Full Scale, Time/Div, Max Samples. Do not attempt to use the
keyboard on this kind of field.
!
Change value up/down multiple arrows: Nbr of Segments is of this type. The left pair of arrows
modifies the value by the smallest increment possible while the right pair modifies the value by a
much larger amount. Do not attempt to use the keyboard on this kind of field.
!
Access a lower level menu: Trigger … is of this type.
!
Move a slider: The Offset, the Delay time, and the trigger level in the Trig Control menu are of
this type. Use the mouse to slide the arrow along the scale. Numeric entry in the value window is
allowed. Scientific notation and common abbreviations (m,u,n,p, S, V) can be used.
Values above or to the left of other values have precedence over the latter.
Selection fields that are gray are not active for the current configuration.
5.3.
Digitizer Control Panel and Functions
The Digitizer Control panel provides all of the features needed to use the Analyzer in the Digitizer mode.
Some of these controls are also active when the Analyzer mode is in use. All of the controls are described
in the sections below:
User Manual: Family of Analyzers
Page 58 of 65