Download User`s Manual

no event smpt
I
show systemlog
3.2.16
P
Disable port event for SMTP
Show system log client & server
information
switch(config-if)#no event systemlog
switch(config)#interface fastethernet 3
switch(config-if)#no event smtp
switch#show systemlog
SNTP Commands Set
Table 3.16: SNTP Commands Set
Commands
Level
sntp enable
G
sntp daylight
G
sntp daylight-period
[Start time] [End time]
G
sntp daylight-offset
[Minute]
G
sntp ip
[IP]
G
sntp timezone
[Timezone]
G
show sntp
show sntp timezone
no sntp daylight
3.2.17
Example
switch(config)#sntp enable
Enable daylight saving time, if
SNTP function is inactive, this
command can’t be applied.
switch(config)#sntp daylight
Set period of daylight saving time, switch(config)# sntp daylight-period 20060101if SNTP function is inactive, this
01:01 20060202-01-01
command can’t be applied.
Parameter format:
[yyyymmdd-hh:mm]
Set offset of daylight saving time, if switch(config)#sntp daylight-offset 3
SNTP function is inactive, this
command can’t be applied.
Set SNTP server IP, if SNTP
switch(config)#sntp ip 192.169.1.1
function is inactive, this command
can’t be applied.
P
Set timezone index, use “show
switch(config)#sntp timezone 22
sntp timzezone” command to get
more information of index number
Show SNTP information
switch#show sntp
Show index number of time zone switch#show sntp timezone
list
G
Disable SNTP function
switch(config)#no sntp
G
Disable daylight saving time
switch(config)#no sntp daylight
P
no sntp
Description
Enable SNTP function
X-ring Commands Set
Table 3.17: X-ring Commands Set
Commands
Level
Description
Example
ring enable
G
Enable X-ring
switch(config)#ring enable
ring master
G
Enable ring master
switch(config)#ring master
ring couplering
G
Enable couple ring
switch(config)#ring couplering
ring dualhoming
G
Enable dual homing
switch(config)#ring dualhoming
ring ringport
[1st Ring Port] [2nd Ring Port]
G
Configure 1st/2nd Ring Port
switch(config)#ring ringport 7 8
Configure Coupling Port
switch(config)#ring couplingport 1
Configure Control Port
switch(config)#ring controlport 2
Configure Dual Homing Port
switch(config)#ring homingport 3
P
Show the information of X - Ring
switch#show ring
G
Disable X-ring
switch(config)#no ring
G
Disable ring master
switch(config)# no ring master
ring couplingport
[Coupling Port]
ring controlport
[Control Port]
ring homingport
[Dual Homing Port]
show ring
no ring
no ring master
G
G
G
41
Chapter3