Download MvsNET System Quick Guide

Sicep MvsNET – Quick guide
this point, the file has been created and just needs to be
! At
completed with the other information available.
Press TAB to move between the fields.
In particular, if applicable, it is important to enter any
telephone numbers or IP addresses necessary for the queries.
When you have finished, press F8 or click on the Save button.
6.3 Adding channels
To add a channel starting from the equipment, press CTRL+F5 or click on the +Channel button.
! Select the type of channel to configure and a model.
Scroll through the lists using the arrows and use the TAB key
to move from one list to the next.
Press ENTER or click on OK
54