Download User Manual - CNET Content Solutions

Transcript
Vess R2000 Series User Manual
Viewing FRU VPD Information
FRU VPD refers to Vital Product Data (VPD) information about Field Replaceable Units (FRU) in the enclosure.
The number and type of FRU depends on the subsystem model.
To view FRU VPD information:
To make Enclosure settings:
1. Click the Device tab.
4. Scroll down to view the Blowers.
The screen displays the status and speed of the cooling units. If blower speed is below the Healthy
Threshold, a malfunction is indicated in the Status column. See "Diagnosing an Enclosure Problem" on
page 209.
Viewing Temperature Sensor Status
2. Click the Component List icon.
To view the status of the temperature sensors:
3. Click the Enclosure and click the FRU VPD button.
1. Click the Device tab.
Use this information when communicating with Technical Support and when ordering replacement units.
For contact information, see "Contacting Technical Support" on page 228.
Viewing Power Supply Status
To view the status of the power supplies and the fans that cool those power supplies:
1. Click the Device tab.
2. Click the Component List icon.
2. Click the Component List icon.
3. Click the Enclosure and click the View button.
4. Scroll down to view the Temperature Sensors.
If any temperature exceeds the Healthy Threshold value, an overheat condition exists in the enclosure.
See "Making Enclosure Settings" and "Diagnosing an Enclosure Problem" on page 209.
Viewing Voltage Sensor Status
3. Click the Enclosure and click the View button.
To view the status of the voltage sensors:
4. Scroll down to view the power supplies.
1. Click the Device tab.
The screen displays the operational and fan status of the power supplies. If any status differs from
normal or the fan speed is below the Healthy Threshold value, a malfunction is indicated in the Status
column.
See "Replacing a Power Supply" on page 177.
Viewing Cooling Unit Status
To view the status of the cooling units:
1. Click the Device tab.
2. Click the Component List icon.
3. Click the Enclosure and click the View button.
66
2. Click the Component List icon.
3. Click the Enclosure and click the View button.
4. Scroll down to view the Voltage Sensors.
If any voltage is outside the Healthy Threshold values, a voltage malfunction in the enclosure is indicated
in the Status column. See "Diagnosing an Enclosure Problem" on page 209.