Download User Manual - CNET Content Solutions

Vess R2000 Series User Manual
Accessing the CLU Quick Setup Menu
Making Subsystem Date and Time Settings
To access the Quick Setup menu in the command line utility:
To set the subsystem date and time:
1. At the administrator@cli> prompt, type menu and press Enter.
1. Press the arrow keys to highlight System Date.
The CLU main menu appears. See Figure 3.
Figure 3 - 1: CLU main menu
2. Press the backspace key to erase the current date.
3. Type the new date.
4. Follow the same procedure to set the System Time.
5. Press Control-A to save these settings and move to the Management Port settings screen.
Virtual Management Port Settings
Making Virtual Management Port Settings – Automatically
Automatic settings require a DHCP server on your network. DHCP is currently supported on IPv4 only.
Under Quick Setup, the Management Port IPv4 settings screen follows the System Date and Time settings
screen.
2. Highlight Quick Setup and press Enter.
The first Quick Setup screen enables you to make Date and Time settings.
To enable automatic management port settings:
1. Press the arrow keys to highlight DHCP.
2. Press the spacebar to toggle to Enable.
3. Press Control-A to save these settings and move to the Management Port IPv6 settings screen.
42