Download for the ca 8333 only

Transcript
Notes: This screen corresponds to the choice “non-active quantities broken down” in the VAR tab of the Calculation Methods
menu of the Configuration mode. If the choice had been “non-active quantities not broken down”, then the D label (distortion power) would have disappeared and the Q1 label would have been replaced by the N label. This non-active power
has no inductive or capacitive effect.
Filters L2 and L3 display the same information for phases 2 and 3.
10.2.2. THE ENERGY METERS DISPLAY SCREEN
The Wh... sub-menu displays the energy meters.
Meters of the energy generated by
the load.
Meters of the energy consumed by
the load.
Active energy.
Inductive reactive effect .
Reactive energy.
Distortion energy.
Capacitive reactive effect
.
Apparent energy.
Figure 102: The Energies Consumed and Generated display screen in L1
Notes: This screen corresponds to the choice «non-active quantities broken down» in the VAR tab of the Calculation Methods
menu of the Configuration mode. If the choice had been «non-active quantities not broken down», then the Dh label
(distortion energy) would have disappeared and the Q1h label would have been replaced by the Nh label. This non-active
energy has no inductive or capacitive effect.
Filters L2 and L3 display the same information for phases 2 and 3.
10.3. FILTER Σ
10.3.1. THE TOTAL POWERS AND ASSOCIATED QUANTITIES DISPLAY SCREEN
The W... sub-menu displays the powers and associated quantities.
Total active power.
Total power factor.
Total reactive power.
Total fundamental power factor (also
called displacement factor - DPF).
Total distortion power.
Total tangent.
Total apparent power.
Figure 103: The Total Powers and Associated Quantities display screen in Σ
Note: This screen corresponds to the choice “non-active quantities broken down” in the VAR tab of the Calculation Methods
menu of the Configuration mode. If the choice had been “non-active quantities not broken down”, then the D label (distortion power) would have disappeared and the Q1 label would have been replaced by the N label. This non-active power
has no inductive or capacitive effect.
62