Download User`s Manual

Transcript
Setting
Set Handset Volume
#132+[00~12]#
Handset Volume
You can set the Handset volume to
from 0~12
proper value, default is 10
Set Auto
Setting
TFTP Server IP
Address
#135#
configure TFTP
You can set the TFTP Server IP
Server IP
address
Address
Set Auto
Setting
FTP Server IP
Address
#136#
configure FTP
You can set the FTP Server IP
Server IP
address
Address
Setting
Auto configure mode
#137+[0~2]#
0: Disable, 1:
You can set the Auto configuration
TFTP mode, 2:
mode, 0: Disable, 1: use TFTP Server,
FTP mode
2: user FTP Server
B call A, and A transfer the call to C, A
Setting
Blind transfer
flash#510#
Phone no.#
need to press flash button and then
None
press #510#(phone no. of C)#, while A
hung up the phone, then call transfer
the call to B and C.
B call A, and A transfer the call to C, A
need to press flash button and then
Setting
Attendant transfer
flash#511#
Phone no.#
None
press #511#(phone no. of C)#, call
establish between A and C. While A
hung up the phone then call transfer to
B and C.
B call A, and A transfer the call to C, A
need to press flash button and then
flash#512#
Setting
3-way-calling
Phone no.#
None
flash
press #512#(phone no. of C)#, while C
pick up the phone, A need to press
flash again, and then begin 3-way
conference..
Setting
PSTN mode
0*
Set default use
Provide setting change default setting
PSTN mode
to PSTN mode
1*
Setting
Realm Switch
2*
None
3*
64
You can change different realm for
outgoing call.