Download final report - Worcester Polytechnic Institute

Transcript
APPENDIX K: Building a Solar Box Cooker
Source: http://www.exoticblades.com/tamara/sol_cook/instruct.html
Supplies and Equipment
Gathering the supplies and equipment required to build a solar oven is a time-consuming
aspect of the whole project. The insulation and aluminum foil tape are items you may not
have worked with before. They are found in the insulation section of larger hardware or
home supply stores. The cardboard is a common material, but it may take a few weeks to
find the boxes of the right size. All the other items are readily available at most hardware
or grocery stores.
Supplies
A solar box cooker is constructed mainly of cardboard and aluminum foil. Building a
solar box cooker made requires the items on this list:
•
•
•
•
•
•
•
•
•
•
Cardboard for reflectors -- heavy-duty two-ply corrugated cardboard, such as two
computer monitor boxes, 14 feet by 3 feet total
Cardboard for inner box -- lid of a standard 10 ream office paper box, 11 1/2” by
18”
Cardboard for inner box lid -- enough to make a strip 5” wide and 62” long
Cardboard for outer box -- box approximately 16” by 22” and at least 6” deep
Heavy-duty aluminum foil, one 75 square feet roll
Plate glass, 12 ” by 18 1/2”
Foil-backed foam board insulation, about 1/2” inch thick, sold in 4’ by 8’ sheets.
(The whole 4’ by 8’ sheet is not used for one cooker. You may be able to find
discarded scraps of insulation to use for the project.)
Aluminum foil tape, available where insulation is sold -- 2” by 50 yard roll
6’ roll of 1/2” wide adhesive-backed foam weatherstripping
One quart white glue, such as Elmer’s
Equipment
These tools will not be used up in the process of making the solar cooker, and can be
reused.
•
•
•
•
•
•
Box knife and sharp blades
Measuring tape or yardstick
T-square and protractor
Marking pen
Brushes and rollers to spread glue
Containers to hold glue and water mixture, such as empty cans or wide-mouth jars
97