Download "user manual"

4. Installation
4.1Fitting/Exchanging the lamp
DANGER !
Install the lamps with the device switched off only.
Unplug from mains before !
1.Disconect the fixture from mains and allow the fixture to cool at least 15 minutes.
2.To insert the lamp remove the top cover by loosening the 3 quarter-turn fasteners on the top cover.
3.Grasp the lamp by the reflector and pull it out of the lamp holder.
4.Pull the socket off the lamp.
5.Push socket fully onto the pins of the new lamp.
6.Place the lamp into the lamp holder
7.Replace the fixture cover and tighten the 3 quarter-turn fasteners.
socket
lamp
Do not operate this fixture with opened housing-cover!