Download User Manual - D-Link
Transcript
Section 4 - Configuration IP Filter By enabling IP filtering you can allow or block visitors from accessing the NVR. To add IP addresses to the Allowed or Blocked lists, enter the IP address range you want to allow or block into the text boxes, then click on Add to Allowed List or Add to Blocked List. Enable Allowed List: Enabling this will allow only the IP addresses in the allowed list to access your NVR. Note: Make sure you enter the IP address of the PC you use to access the NVR before enabling this option, or you may not be able to access it afterwards. Enable Blocked List: Enabling this will block all IP addresses in the blocked list from accessing your NVR. D-Link DNR-312L User Manual 47