Download Listen tour guide system manual
Transcript
LR-400/500 Operating Instructions 1 Turn Unit On 1A Volume knob Rotate the volume knob counterclockwise with an earphone or headset connected to the unit. WARNING: Excessive volume may result in hearing damage. 2 Antenna Placement 2A Antenna Position Raise the antenna to the upright position. When the antenna if fully extended, it will click into position. NOTE: Be aware that the transmission range could decrease if the antenna is not in an upright position. LR-400/500 3 Select a Channel 3A Select the channel using channel select buttons Select the channel to match the transmission channel by pressing the UP and DOWN buttons on the receiver. 45