Download Listen tour guide system manual

Transcript
LR-400/500 Operating Instructions
1
Turn Unit On
1A Volume knob
Rotate the volume knob counterclockwise with an earphone or headset connected to
the unit.
WARNING: Excessive volume may result in hearing damage.
2
Antenna Placement
2A Antenna Position
Raise the antenna to the upright position. When the antenna if fully extended, it will
click into position.
NOTE: Be aware that the transmission range could decrease if the antenna is
not in an upright position.
LR-400/500
3
Select a Channel
3A Select the channel using channel select buttons
Select the channel to match the transmission channel by pressing the UP and DOWN
buttons on the receiver.
45