Download MSD Servo Drive Specification - Functional Safety

moog
ID no.: CB38398-001 Date: 12/2013
MSD Servo Drive Specification – Functional Safety
2
Note:
yy This document does not replace the MSD Servo Drive single-axis system
operation manual (ID no.: CA65642-001), it merely supplements it.
yy Please be sure to observe the information contained in the “For
your safety”, “Intended use” and “Responsibility” sections of the
aforementioned operation manuals.
yy For information on installation, setup and commissioning, and details of
the warranted technical characteristics of the MSD Servo Drive series, refer
to the additional documentation (Operation Manual, User Manual, etc.).
MSD Servo Drive Specification – Functional Safety
Subject to technical change without notice.
ID no.: CB38398-001 The content of our documentation was compiled with the greatest care and attention,
and based on the latest information available to us.
Date: 12/2013
Applicable as from firmware version: Development Phase – Revision 3
The German version is the original of this Operation Manual.
We should nevertheless point out that this document cannot always be updated in line
with ongoing technical developments in our products.
Information and specifications may be subject to change at any time. For information on
the latest version please visit [email protected].