Download Micro-Jump Manual

Detailed layout of Micro-Jump ports and connectors
7
6
5
1
8
2
3
4
1. LED Emergency SOS, Blink, and Flashlight
2. Blue Battery Terminal Socket for the Jump Start Cable
3. LCD display for monitoring percentage of charge and charger voltage
4. Push Button On/Off and Mode Switch for flashlight and voltage settings
5. USB 5V/2A output for electronic devices x 2 ports
6. 12V/2A input for recharging the Internal Lithium Battery
7. Master switch needs to be "On" when recharging the Internal Lithium
Batteryand when using either the Flashlight or other Charging Ports.
When jumping a vehicle it should be left in the "Off" position.
8. 12V / 16V / 19V output for laptops and computers
5