Download MaxWorkFlow 3.6.1

34
ULTRE SCSI Imagesetter
SCSI address
Host Adapter ID: A host adapter is the card that connects your computer
to the SCSI-bus. An example would be a PCI SCSI host
adapter like the Adaptec 2940UW. Adaptec set all their
host adapters to ID 7 by default. Enter the ID for your
host adapter.
Ultre SCSI ID:
Several devices can be connected to the SCSI interface.
Enter the SCSI ID for your Ultre device.
Async SCSI write
Select this check box to start the next operation before the current one is
completed. Operations are not synchronized.
Auto Advance Length
Enter the length of film to be advanced between jobs. Choose the units of
measurement from the menu alongside this text box.
34.2.1.2 Media tracking options
Film Counter
Use Film Counter:
Select this check box if you wish to track the media in
your device. To do this, you must advance the media
using the Media Feed or Feed and Cut pop-up menu controls, as described in “Media Feed” on page 439. You
must not advance the media using the imagesetter
controls.
You must set the Film Left counter whenever you
change a film roll.
Film Left:
438
Enter the length of the film roll when the film is
changed. Choose the units of measurement from the
menu alongside this text box. Once you have initially
set the Film Left counter, it changes to reflect the amount
of film left in the imagesetter.
MaxWorkFlow 3.7 User Manual