Download Product Name Here - Triangle Biomedical Sciences
Transcript
CHAPTER 5 – INSTALLATION AND OPERATIONAL QUALIFICATION This procedure describes the steps for installation and testing of the basic mechanics of the unit and should be done on all new units or units returning from factory service. 1. Position the unit on a flat level surface away from heat (radiators, stoves, direct sunlight, etc.) and moisture (sinks, drains, etc.). 2. Connect the unit to a power source. The main power supply connection must provide (depending on the model): 110 VAC +/- 10%; 60 Hz; 10A; grounded 220 VAC +/- 10%; 50 Hz; 6A; grounded In addition to the ATP anti-blackout feature, an uninterruptible power supply (UPS) can be utilized to provide power for short power outages and some protection against power fluctuations, line noise and power spikes. Use of a UPS is highly recommended for sites which experience “brown-outs” or other power fluctuations. The use of adapters to plug in more than one instrument to the same outlet (power strip) does not provide a reliable power supply. It may produce overheating and create a potential fire hazard. ECC electrical instrument directives forbid such practices. 3. Turn the power on. 4. Select the preferred Language on the initial screen. 5. From the Main screen select Service/ Edit Setup. Set the elevation to the appropriate value for the location of the laboratory. (See Chapter 12 for more details.) This is particularly important for higher elevation location. Failure to set the elevation could result in short fill and pressure errors. 6. Choose your Alarm settings. 7. From the Main screen select Service/ Pressure Test. Perform a pressure test to confirm the operation of the pumps and sensors associated with the pressure system. 8. From the Main screen select Service/ Vacuum Test. Perform a vacuum test to confirm the operation of the pumps and sensors associated with the vacuum system. 9. From the Main screen select Service/ Retort Heating. Perform a Retort heating test. © Copyright 2013 General Data Healthcare, Inc. 14