Download Owner`s Manual

7. Look underneath the trampoline. Locate the straps
attached to the underside of the Frame pad. Position
each outer strap so that one strap is on each side of
the frame as shown. Tie the outside straps sewn to
the pad Joints to each side of the frame as shown
and attach the inner straps to the near V-rings.
Inner Straps
7
Strap sewn in the outside of
the Joint for the pad bottom
Inner Straps
5
V-ring
Frame
Repeat this step to tie the remaining straps (not shown).
Outer Strap
Outer Strap
8
8. Slide the Straight Tube(9) and Curved Tube(10)
into Foams (11) as shown.
11
11
9
9. Lay one Straight Tube(9) with Foam and one
Curved Tube(10) with Foam on the ground.
Insert the Straight Tube(9) into the Curved
Tube(10). Secure with a M4.8x16mm Selftapping screw(7)
10
9
Repeat this step to attach the five remaining
Straight Tubes(9) and Curved Tubes(10) together
(not shown).
10
7
9
21