Download OneCommand NIC Teaming and VLAN Manager Version

3. Using the OneCommand NIC Teaming and VLAN Manager
OneCommand NIC Teaming and VLAN Manager Element Definitions
Menu Bar
File
Exit – Exits the application.

Tools
Backup Current Configuration – Saves the current teaming configuration on the
system. Use the Save As browser dialog box to specify a location for backing up
the configuration and click Save.
Restore Saved Configuration – Restores from a saved configuration. Use the
browse dialog box to select a saved configuration and click Open. A
Confirmation Restoration message warns you that the current teaming
configuration will be erased. Click Yes on the message to proceed.
General Settings – The General Settings dialog box is displayed to set the global
reactivation delay Setting a reactivation delay value while creating a team (on
the Create Team tab) overrides any default global reactivation delay value set or
changed in the General Settings dialog box.



Help


Contents – Displays OneCommand NIC Teaming and VLAN Manager online
help.
About OneCommand NIC Teaming and VLAN Manager – Displays
OneCommand NIC Teaming and VLAN Manager version information.
Toolbar Buttons
The toolbar buttons perform the following tasks:
Backup button

Saves the current configuration. Use the Save As browser dialog box to specify a
location for backing up the configuration and click Save.
Restore button

Restores from a saved configuration. Use the browse dialog box to select a
saved configuration and click Open. A Confirmation Restoration message
warns you that the current teaming configuration will be erased. Click Yes on
the message to proceed.
Create Team button

Creates a team. See “Creating a Team” on page 27 for more information.
Discovery Refresh button

Initiates a discovery refresh cycle.
OneCommand NIC Teaming and VLAN Manager User Manual
P008014-01A Rev. A
18