Download Avid AirSpeed Installation and User`s Manual

Installing AirSpeed in a Rack
Outer Support Rail Assembly
Adjustment pan-head screws
(8-32 x .5)
Rear adjustable
rail brackets
Outer slide rail
Pan-head screws
(8-32 x .5)
Nuts and washers
Front rail
brackets
3. Repeat step 1 and step 2 with the other outer slide rail and brackets.
4. Select a position in the rack where you can mount the AirSpeed at eye
level (or lower). The AirSpeed needs to be positioned at the proper
baseline position (see the following figure).
Positioning the AirSpeed
Rack mounting rail
5/8 in
Rack mounting rail
hole spacing
5/8 in
1/2 in
5/8 in
1 3/4 in
3U
AirSpeed bezel
mounting holes
5/8 in
1/2 in
5/8 in
1 3/4 in
2U
1/2 in
1 3/4 in
1U
AirSpeed
5/8 in
5/8 in
EIA rack unit
Rail kit mounting holes
5/8 in
Baseline position is between
two 1/2-inch holes.
1/2 in
41