Download Sartorius Moisture Analyzer
Transcript
Interface Port Purpose The moisture analyzer has an interface port for connecting an external printer or computer (or other peripheral device). External Printer You can use an external printer to generate printouts. Computer Analyses and calculated values can be transmitted to a computer for further evaluation and for documentation. ! Warning When Using Pre-wired RS-232 Connecting Cables: RS-232 cables purchased from other manufacturers often have pin assignments that are incompatible with Sartorius products. Be sure to check the pin assignments against the chart on the next page before connecting the cable, and disconnect any lines identified differently from those specified by Sartorius (e.g., pin 11). Failure to do so may damage or even completely ruin your moisture analyzer and/or peripheral device(s). 26 Preparation For instructions on adapting the interface port to the peripheral device, please refer to the chapter entitled “Configuration.” To get the most from the versatile characteristics of your moisture analyzer with regard to documentation of results, we recommend connecting a printer from Sartorius. The resulting printouts will contribute decisively to simplifying GLP-compliant practices.