Download User Manual - brite-View

(4) During the warm-­‐up period, the POWER LED will blink in blue until the signal link between the BV-­‐1222T and the BV-­‐1222R is established. Make sure your TV set or projector is in “HDMI input” mode, and is already powered on.
(5) If you have electronic devices such as a cordless phone, wireless access point/router sharing the 5GHz channel frequency, you may experience disturbed picture or diminished sound quality when you use the electronic device near the HDelight. Press the INFO./CHANNEL button on the top of Receiver box to change the HDelight to different channels. Note: 12