Download warning - HIGH RENT
Transcript
Section 2 - Pre-Operation and Controls Walk-Around Inspection Begin your walk-around inspection at item 1. Continue to your (counterclockwise when viewed from top) checking each item in sequence. right INSPECTION NOTE: On all components, make sure there are no loose or missing parts, that they are securely fastened and no visible leaks or excessive wear exists in addition to any other criteria mentioned. Inspect all structural members including attachment for cracks, excessive corrosion and other damage. 1. Boom Sections & Lift, Tilt, Extend/Retract, Compensating (Slave) Cylinders • Check front, top, side & rear slider pads for adequate grease. • Pivot pins secure; hydraulic hoses undamaged, not leaking. 2. Left Outrigger (12 & 13M)- Pins secure; hydraulic hoses & cylinder undamaged, not leaking. 3. Front Work Lights - Clean, undamaged and work properly. 2-2 3121851