Download User Manual

Assembling the bottom unit
Page 111
Note:
*
If this is not considered, the wires bend and tear apart after longer times of
operation!
Replace bent traction ropes!
Wrongly mounted traction
rope:
If the nest floor drive has the
same sense of rotation (see
arrow), the traction ropes
bend and tear apart.
Inserting the traction rope tappets
•
The halves (1) are made so that the respective
tappets (2) of the traction ropes (3) can be
placed into the notch (5) of the half inside.
•
After placing the tappet into the notch and the
wire into the rope channel (4) running upwards,
this half is placed on the tube 1” of the nest
floor drive.
Assembly manual Nest BD-Colony 2+
Edition:
05/2006 M 1530 GB