Download Installation Manual

ELECTRICAL WORK
IMPORTANT: Connect the connective cables to the terminals as identified with their respective
matched numbers on the terminal block of indoor and outdoor units. For example, see
the following US models: Terminal L1(A) of outdoor must connect with terminal L1 on the
indoor unit.
L2
L2
L1 L2 S
L1 L2 S
L1 L2 S
L1 L2 S
NOTE:please refer to the following figures,if the client want wire by themselves.
please run the main power cord through the lower line-outlet of the cord clamp.
One-two models:
L2
LNS
LNS
Model A
L1 L2 S
L1 L2 S
L(1) 1 2(N) S
Model B
L(1) 1 2(N) S
Model C
Magnetic ring(not supplied,optional part)
(Used to hitch to the connective cable of indoor
and outdoor units after installation.)
32
W 1(L) 2(N) S
W 1(L) 2(N) S
Model D