Download Home Theater System
Transcript
To turn off the system Press ?/1 on the remote or on the system. The system enters standby mode. In standby mode, you can reduce the power consumption to minimum (Power Saving mode) and save energy in standby mode. To turn off the system completely, unplug the AC power cord from mains. While playing a disc, do not turn off the system by pressing ?/1. Doing so may cancel the menu settings. When you turn off the system, first press x to stop playback and then press ?/1. z On Auto-Function If a disc is already inserted to any disc tray, you can play it back simply by pressing the H or its corresponding DISC SELECT 1-5, even if the previous music source was not a DVD. The function changes to DVD and playback starts (AutoFunction). However, if Program Play is on, you can only start playback by pressing the H. z On the DISC indicators The DISC indicators change as follows: – green: the disc tray is chosen, or the disc is being played back. – off: there is no disc. – amber: a disc is placed on the disc tray, however, the disc tray is not chosen. Before the disc existence is checked, the indicators are in amber. z On Auto Power Off In DVD function, you can set the system to turn off automatically if the disc is not played back for 30 minutes. To activate the Auto Power Off function, press x and DISC SELECT 5 on the system simultaneously until “AUTO.OFF Y” appears on the front panel. To deactivate the function, do the same procedure above until “AUTO.OFF N” appears on the front panel. Even though Auto Power Off function is deactivated, the system turns off automatically when you playback a DVD and the system is in pause mode or is displaying the DVD’s menu for about one hour. Additional operations 7 8 >10 10/0 ./> . > H H 9 m X M x x MUTING F X G VOLUME + g f O To Stop Pause* Resume play after pause Go to the next chapter, track, scene or file in continuous play mode Go back to the preceding chapter, track, scene or file in continuous play mode Mute the sound Change a disc while playing another disc Play the desired disc directly Operation Press x. Press X. Press X or H. Press >. Press .. Press MUTING. To cancel muting, press it again, turn the power on or turn the MASTER VOLUME clockwise to turn the volume up. Press EX-CHANGE on the system. Press DISC SELECT 15 on the system. * You cannot pause during JPEG playback. Notes • Do not push the disc tray when closing it. Press A OPEN/CLOSE on the system to close the disc tray. • If there is no disc in any disc tray, “NO DISC” appears on the front display. 30GB HT-C800DP 4-247-292-11(1)