Download NI X Series Multifunction Data Acquisition - Data Sheet

Transcript
±100 pA
Input bias current
Crosstalk (at 100 kHz)
–75 dB
Adjacent channels
–90 dB
Non-adjacent channels
1.2 MHz
Small signal bandwidth (–3 dB)
4,095 samples
Input FIFO size
4,095 entries
Scan list memory
Data transfers
DMA (scatter-gather), programmed I/O
NI PCIe/PXIe-6341/6343
USB Signal Stream, programmed I/O
NI USB-6341/6343
Overvoltage protection (AI <0..31>, AI SENSE, AI SENSE 2)
±25 V for up to two AI pins
Device on
±15 V for up to two AI pins
Device off
±20 mA max/AI pin
Input current during overvoltage condition
Settling Time for Multichannel Measurements
Accuracy, full scale step, all ranges
2 μs convert interval
±90 ppm of step (±6 LSB)
3 μs convert interval
±30 ppm of step (±2 LSB)
5 μs convert interval
±15 ppm of step (±1 LSB)
None
Analog triggers
Typical Performance Graph
Analog Output
Number of channels
2
NI 6341
4
NI 6343
16 bits
DAC resolution
±1 LSB
DNL
16 bit guaranteed
Monotonicity
Maximum update rate
900 kS/s
1 channel
840 kS/s per channel
2 channels
775 kS/s per channel
3 channels
719 kS/s per channel
4 channels
6/18
www.ni.com