Download Figures - Exemys

GRD’s User Manual
Exemys
9.6.3 Reading of analog inputs
To read the value of analog inputs the ANALOG command is used
Command
ANALOG
Description
Reads the state of analog inputs
The device will send an SMS with the following information
Ana1=xx.xx
Ana2=xx.xx
Ana3=xx.xx
Ana4=xx.xx
Ana5=xx.xx
Ana6=xx.xx
V
V
V
V
V
V
xx.xx represent the current in the connectors of the corresponding input
Example:
Ana1=3.23
Ana2=6.44
Ana3=9.10
Ana4=0.27
Ana5=1.10
Ana6=1.32
V
V
V
V
V
V
9.6.4 Reading of count inputs
To read the value of count inputs the COUNTS command is used
Command
COUNTS
Descripción
Reads the state of count inputs
The device will send an SMS with the following information
:
P1=xxxxxxxxxxxx
P2=xxxxxxxxxxxx
xxxxxxxxxxxx represent the counts in the connectors of the corresponding input
Example:
P1=5000
P2=2980
www.exemys.com
Rev. 2.2.0 Julio 2010
106