Download Copernicus Manual - SparkFun Electronics

TRIMBLE STANDARD INTERFACE PROTOCOL (TSIP)
13.14
Report Packets Sent by the Receiver to the User
The table below summarizes the packets output by the receiver. The auto
response and power-up packets may depend on user-selected options (see
Table A.21).
Table A.9
108
User-Selected Report Packet Options
Output ID
Packet Description
Input ID
0x41
GPS time
0x21, auto
0x42
single-precision XYZ position
0x37, auto
0x43
velocity fix (XYZ ECEF)
0x37, auto
0x45
software version information
0x1F, power-up
0x46
health of Receiver
0x26, auto, power-up
0x47
signal level for all satellites
0x27
0x4A
single-precision LLA position
0x37, auto
0x4B
machine code/status
0x26, auto, power-up
0x4D
oscillator offset
0x2D
0x4E
response to set GPS time
0x2E
0x55
I/O options
0x35
0x56
velocity fix (ENU)
0x37, auto
0x57
information about last computed fix
0x37
0x58
GPS system data/acknowledge
0x38
0x5C
satellite tracking status
0x3C
0x6D
all-in-view satellite selection
0x24, auto
0x82
differential position fix mode
0x62, auto
0x83
double-precision XYZ
auto, 0x37
0x84
double-precision LLA
auto, 0x37
0x8F-20
last fix with extra information (fixed point)
auto, 0x37, 0x8E-20
0xBB
GPS navigation configuration
0xBB
0xBC
receiver port configuration
0xBC
Copernicus GPS Receiver Reference Manual