Download Application Scanning Manual

Chapter 3 - Scan
RocketSCAN FMATM
Image Processing
These settings handle any post process rotation or deskew settings. As most scanners handle deskew in
the driver settings, this option should not be enabled unless instructed to do so. Enabling both this
deskew and the scanner driver deskew will cause the image to distort and stretch.
Plugin Tab
This tab contains some additional settings for RocketSCAN.
Enable pre-save prompt: enables the first box to tell you your
application and image count after click save
Enable post-save prompt: enables the second box to tell you
your batch number and be able to print your cover page
Enable post autorotate software deskew: an additional post
process used if the scanner does not have a deskew option.
It is not recommended to change any of these
settings without specific knowledge and
guidance from an administrator or Image One
23