Download Nikon Scan Windows

2. Before You Begin
2.1 System Requirements
Nikon Scan Windows 3.1 version
To run Nikon Scan Windows 3.1 version, the following
minimum hardware and software is required:
•
•
•
•
•
IBM PC/AT or compatible with i386SX or better
MS-DOS 5.0 or later
MS-Windows 3.1 or later
8MB or more of RAM
1MB or more of hard disk capacity (a 300MB or larger hard
disk is recommended)
• SCSI board with ASPI driver (Adaptec 1505 and 2940 are
recommended.)
• VGA (640 x 480 pixels) monitor or better
• Monitor with 16.7M colors, 64K colors, 32K colors, 256
colors, 256 grayscale, 16 grayscale
Nikon Scan Windows 95 version
To run the Windows 95 version of Nikon Scan, the following
minimum hardware and software is required:
•
•
•
•
IBM PC/AT or compatible with i386DX or better
MS-Windows 95
8MB or more of RAM
1MB or more of hard disk capacity (a 300MB or larger hard
disk is recommended)
• SCSI board with ASPI (Adaptec 1505 and 2940 are
recommended.)
• VGA (640 x 480) monitor or better
• 8-bit or more of video card and monitor with 16.7M colors,
64K colors, 32K colors, 256 colors
-5-