Download USER`S MANUAL

Self Timer 10 sec
The shutter will be released 10 seconds after the shutter button is fully
depressed.
After composing the picture, press the shutter button “half-way” and adjust
the focusing. Then, press the shutter button the rest of the way and the
self-timer will activate. During the self-timer operation you will hear an
electronic beeping sound. The beeping sound will be much faster during
the last two seconds, before the shutter is released.
[ Camera Settings](P.27) → [Sound Settings] → [Operation
Sound] menu is set to [Off], the electronic sound will not beep even if the
self-timer is operated.
 If you want to cancel the self-timer operation, please turn off the camera.
 When
INTERVAL TIMER
It is possible to take pictures automatically at selected intervals.
1
Select [
Capture Settings] (P.27) → [Drive Mode] → [Interval timer],
and press the button to move the interval timer setting screen. (When the
button is pressed after selecting [Interval timer], the current setting will
be applied.)
When the Interval timer shooting mode is set in the Quick Set menu (P.34),
select [
] and press the
button to display the Interval timer setting
screen (By pressing the
button or the shutter botton halfway after
selecting [
], the current setting will be applied.).
2
Set the desired interval and number of
exposures by using the
buttons.
(Interval can be set from 15 seconds to 60
minutes. The number of exposures can be
set between 2~99 times, or unlimited (∞).)
58