Download Ross Video Limited

FST-6602 Technical Specifications
This section provides the technical specifications for the FST-6602.
Table 5.2 FST-6602 Technical Specifications
Category
Optical Outputs
SDI Inputs
SDI Outputs
Environment
Parameter
Specification
Number of Outputs
1
SMPTE Standards
Accommodated
SMPTE 259M-C, SMPTE 292M, SMPTE
424M
Nominal Wavelength
1310nm
Output Power
-7dBm to -2dBm
Connector Type
Single Mode, LC/UPC
Number of Inputs
1
SMPTE Standards
Accommodated
SMPTE 259M-C, SMPTE 292M, SMPTE
424M
Impedance
75ohm terminating
Return Loss
>15dB to 1.485GHz
>10dB from 1.485GHz to 2.97GHz
Cable Length with Equalizer
> 300m of Belden 1694A cable @ 270Mbps
> 120m of Belden 1694A cable @ 1.485Gbps
> 80m of Belden 1694A cable @ 2.97Gbps
Connector Type
BNC
Number of Outputs
Full Rear Module (8320AR-044): 5
Split Rear Module (8320AR-045): 2
SMPTE Standards
Accommodated
SMPTE 259M-C, SMPTE 292M, SMPTE
424M
Impedance
75ohm
Return Loss
>15dB to 1.485GHz
>10dB 1.485GHz to 2.97GHz
Signal Level
800mV ±10%
DC Offset
0V ±50mV
Rise and Fall Time (20-80%)
700ps. Typical (270Mbps)
120ps. Typical (1.485Gbps, 2.97Gbps)
Overshoot
<10%
Connector Type
BNC
Operating Range
0°C to 40°C
FSR-6601, FST-6602 User Manual (Rev. 1.0)
Specifications • 5-3