Transcript
USER MANUAL FOR AC CHARGER I. Instruction of use: Please choose the matched AC charger based on the parameters and the type of power plug, use only properly selected charger. Do not use the charger to reception device, where the demand for power is greater than specified in the parameters of the charger. The charger is designed for the following parameters AC100-240V / 50-60Hz, allows you to connect the receiving device (or other device DC) to 230V. Use in a dry and cool place. In case of charger damage, please take it to the nearest dealer for repair or replacement. Under no circumstances, never open laptop charger. Opening the housing is a threat to life from electric shock. Do not allow it to gets wet. Do not subject to mechanical damage. If so immediately stop using the charger. Do not throw charger into fire. Charger heating is normal when using. AC charger also draws current when the receiving device is not connected to the charger. Therefore, you must unplug the AC charger from the socket. II. How to take care of your AC charger? Caution should be exercised while connecting charger. First insert the plug into a power source, and then connect the plug to the receiving device. Caution should be exercised when disconnecting charger. First unplug receiving device, and then take plug from the socket. Storage temperature: from -10ºC to 70ºC, air humidity 10-90%. Importer: nTec ul. Chorzowska 44B 44-100 Gliwice More information available on the website: www.qoltec.com
