Download User manual Bluetooth handsfree car kit
Transcript
Product code : Product name : No GIOŚ : 50150 BLUETOOTH HANDSFREE CAR KIT E0012584WBW Thank you for purchasing a high quality QOLTEC brand product! This manual contains all the information needed for installation, use and maintenance product. User manual Thank you for purscharsing Bluetooth handsfree car kit. Device is designed to make phone calls easy and safe while driving a car, by using only your voice. You should devote a few minutes to read the instruction manual to make the best use of the Bluetooth handsfree car kit. Your bluetooth handsfree car kit 1) Microphone 2) Receive call / End call/ Reject call / Redial last call / Language / Pause 3) Connecting devices by bluetooth / mute microphone / previous song / next song 5) Speaker 6) AUX output 7) USB / software update port 8) On/Off 9) Volume – 10) Volume + Characteristic: Simple installation on the control panel, car sun visor, car air conditioner exhaust DSP assist Echo cancallation CVC technology Microphone mute assist Answer / termination / calls repeat A2DP assist, easily play music from your mobile phone and operate it using Bluetooth handsfree car kit. Built-in high sensitivity microphone, high-power speaker for ensuring quality phone calls. Built-in Li-polymer rechargeable battery. Supported software update via USB Backed automatic connection The ability to connect two phones Instalation Instal Bluetooth handsfree car kit in proper location to not reduce view while driving. 1: Place the device on the control panel, sun visor or air conditioner exhaust. 1. Installation on sun visor. 2. Installation on air conditioner. Connect via Bluetooth When you use Bluetooth handsfree car kit for the first time, your mobile phone needs connect to it. Check the instructions for Bluetooth on your phone. A. When Bluetooth handsfree car kit is on, hold for 3 seconds Button to enter connection mode. When alternating LEDs will light up red and blue, turn on Bluetooth on your phone. Find in phone "CAR KIT" device. B. Chose “CAR KIT” C. Enter “0000” code D. Chose “CAR KIT” from list of devices on your phone and connect with it. When connection process is completed, you will hear command confirming connection with your phone, and red LED stops flashing, and will be visible only blue flashing LED. Connecting second phone Press the button for three seconds to enter connection mode, then red and blue LED will illuminate alternating. Follow the same procedure as in the case of the one phone. Caution: When you connect a second phone to Bluetooth handsfree car kit automatically first phone will be disconnect. When connection to second phone is active, once again connect to the first phone, same as previously. Then both phones will be connected to Bluetooth handsfree car kit at the same time. (If you turn on again Bluetooth handsfree car kit, both phone will be connected again). Change language Device can operate in three language: English, Spanish, Chinese. Language is set originally to English. If you want to change language . You'll hear then offers in three languages if you want to select English, select it when you hear this language by pressing those button . When you want to select Spanish, select it when you hear this language by pressing those button . When you want to select Chinese, select it when you hear this language by pressing those button . Device operations 1.On / Off Press on/off button for 3 second to turn on device. The voice command device will confirm inclusion. When you want to switch off the device, press the same button, you will also hear voice confirmation command (if you do not use device for a long time, turn it off). 2. Conversation using only your voice. 2.1. Making a call When device is connected to phone, chose phone number on your mobile phone, conversation will automatically conducted by the Bluetooth handsfree car kit. After ending conversation, device goes into standby mode. 2.2. Receiving calls When device is connected with phone, and you will receive a call, device will notify it by voice command. Press button to receive incoming calls. After ending conversation, device goes into standby mode. 2.3. Reject calls Press button for 3 second to reject incoming calls. 2.4. Mute microphone. When making a phone call Bluetooth handsfree car kit and if you do not want others to hear yours voice, press button to turns off microphone. Press button again to return to the conversation. 3. Redial last call. During a call with the phone, hold the button for three seconds to redial the last number. 4. Set Volume. Press “ + ” to increase volume of the device, press “ - “ to decrease volume. If you set the max volume of the device will notify you by voice command. If you set minimal volume of the device you will also hear voice command, confirming that operation. 5. Switching calls function using a Bluetooth handsfree car kit and phone. During a call, press button to switch chat functions on phone. Press again button to return to the function call in Bluetooth handsfree car kit. 6. Play music mode The device is supported by A2DP function, you can listen to music that is on your speaker phone, by Bluetooth handsfree car kit. 6.1. When playing music you operate it with those buttons: Press to play / stop Press to play the previous song Press to play the next song Press “ + ‘’ to increase the volume Press ‘’ – ‘’ to decrease the volume 6.2. When there is an incoming call or connected device automatically switch from playing music in conversation mode. 6.3. To exit the music mode, you need to turn off music on your mobile phone. 6.4. Set high quality sound to play best music. 7. Charging. Device has buld-in battery. When battery is low please charge it, otherwise device will turn off when lose power. When device reaches max power red LED will turn blue. 7.1. Uninstall the device from its place 7.2. Plug the charger in place of a cigarette lighter, and connect device by USB cable to charger. Troubleshooting 1. If you are unable to connect Bluetooth handsfree car kit with phone. Fallow those instruction. • Check whether Bluetooth handsfree car kit is enabled. • Check whether Bluetooth handsfree car kit has enough battery power. • Check whether the way you want to connect your phone to device is correct. • Check whether Bluetooth handsfree car kit is within 10m to mobile phone, and that between them there is no other electronic devices with its interface. 2. Distorted Sound Adjust the volume of the audio to enhance sound effects. Specification: 1. Bluetooth Version: 2.1 2. Bluetooth Operating Frequency: 2.4GHZ 3. Coverage of the device: 0-10m 4. Working range microphone: 0-1m 5. Charging voltage: 5V 6. Capacity Battery Power: 300mAh 7. Dimensions: 90x55x26mm 8. Weight: 50g 9. Operating Temperature: -10 ~ 70 ° C 10. Storage temperature: -20 ~ 80 ° C Accessories included: USB cable, car charger WARRANTY CARD Provides good quality and reliable device operation, while providing guarantees for a period of twelve months from the date of sale. Warranty extends only to the original user and only for the device installed in the car, during in which was first install. This warranty applies only to the device, and a method for its installation. Correct installation equipment guarantees installer. Damage to equipment caused by improper installation can not be the basis for claims warranty. The warranty will be realize, after seller will receive damaged device or component and finding actual defects in the device. The time for warranty realization repairs or refusal, may reach up to 14 working days. Warranty does not cover damage to equipment caused by improper or inconsistent with instructions in manual, and any mechanical damage, malfunction arising from the poor condition of the battery, flooding, and after theft or accident damage. The warranty does not cover batteries and other supplies exchanged periodically. The warranty does not cover the effects of any external forces (flood, electrical discharges, impact etc.). Warranty does not cover damage caused as result of dismantling or replacement product installation. The guarantor is not responsible for any loss (financial or intangible) associated with the use of the device (e.g. towing vehicle, downtime etc.). In case of breach guarantee seals or interference with the construction of the device, vendor can not be held responsibility in this regard. This warranty card is the only basis for implementation of the warranty and must be attached to complaint. Only obligation of the guarantor, according to this guarantee is to repair, or if it will be impossible, exchange device accordance with warranty. The complaint must be accompanied by an exact description of the malfunction (complaint protocol). Without an exact description of the malfunction, repair warranty will extend and / or may be ineffective. ……………………………… Date and signature of the seller/editor ……………………………… Customer Signature CAUTION ! Equipment must be installed in accordance with current standards and technical regulations, referred to manual. Its installation must be done by a professional or a qualified person. Due to continuous development, product described in the manual or on the packaging may in fact has slightly different appearance and functionality, but this does not detract from its value. Equipment marked with this symbol is recyclable This product should not be thrown into ordinary municipal waste container, but provide to specialized company for recycling. importer : www.netec.eu Made in PRC