Download Moxa Managed Ethernet Switch User`s Manual
Transcript
Moxa Managed Ethernet Switches Featured Functions Restart This function provides users with a quick way to restart the system. Reset to Factory Default This function provides users with a quick way of restoring the Moxa switch’s configuration to factory defaults. The function is available in the serial, Telnet, and web consoles. NOTE After restoring the factory default configuration, you will need to use the default network settings to re-establish the web or Telnet console connection with the Moxa switch. Loop Protection The switch is designed with a loop checking mechanism: Send a control BPDU from the Ethernet port and check if this control BPDU will be sent back to the switch again. If the looping occurs, the switch will automatically block the Ethernet port to prevent looping. Check the Enable box and click Activate to enable the Loop protection. 3-18